QX-2600-10000 Crushing Material/Fire-burned Iron Dry Grinding and Cleaning Machine

Equipment Introduction:

This product is mainly used for dry grinding of social scrap steel shearing materials, fire-damaged iron, and oily machine pig iron, to remove surface rust, impurities and oil stains, and obtain clean high-quality furnace materials, achieving the purpose of reducing harmful gas emissions and improving the quality of molten iron.

Main technical parameters：

NO.	Item	Parameters	Remarks
1	Cylinder shape (diameter × length)	Φ2600×10000 mm（Effective length of loading). Made of Q355 manganese plate;	Wall thickness 20mm
2	Drive motor power	200 kW
3	Reducer	Hardened tooth surface, ZLY 450
4	Hydraulic pump station	5.5 kW motor + gear pump
5	Transmission form	Gear ring external meshing (heavy duty)	1 set in total
6	Support form	Roller + roller (heavy duty)	2 sets in total
7	Feed hopper	Feeding from the top, with fully automatic gate.
8	Discharge port	With fully automatic door cover
9	Dust collector and air duct	Bag dust collector (37 kW motor) + cyclone dust removal	300 bags
10	Electrical control	Manual/automatic remote control, variable frequency start and stop
11	Suitable materials for processing	Fire iron, crushing materials
12	Output	17-20 tons/barrel (material stacking density 1t/m³)
13	Total length of the machine	About 16300 mm
other	1. The cylinder is made of 20mm thick manganese plate; 2. The material is loaded at one end and discharged at the other end. Both ends are closed during dry grinding, with low noise and no dust spillage; 3. It is equipped with manual and automatic working modes to reduce labor, and one worker can complete all the work.

The overall advantages of AEMK dry grinding and cleaning machine are as follows：

1. No dust spillover during operation, absolutely meet environmental protection standards;
2. After cleaning, the surface of the material is bright and dazzling, no dust inclusion,and it meets the standard of super fine charge;
3. With frequency converter, frequency conversion start, frequency conversion control,not only protect the motor, but also save power.

(Control cabinet, machine nameplate)

(Inverter, remote control)

(Host)

(dust collector)

(Before dry grinding of fire-burned iron)

(After dry grinding of fire-burned iron)